The Best Way to paint a radiator?

Pocket

Painting cast iron pits – not so hard it can not be done on their own, conserving a good sum of money. In addition, you’ll be confident in the character of the job.

What is required in order to cope with this job? To qualitatively paint the battery, then you’ll want the perfect paint, in addition to comprehension of a few technological”keys” of the process itself. Paints

When painting heating batteries, specific requirements are made for their coating: they must be resistant to continuous exposure to high temperatures, abrasion, in addition to long retain consumer properties, in other words, an attractive look. The following compositions are suitable for painting cast iron batteries:

Alkyd enamels.

Pros: when heated up to 90 degrees, they maintain strength, don’t”peel off”, resistant to abrasion.

Cons: for a long time holds a specific odor, coating quickly turns yellow, can be dimmed.

Water-dispersion acrylic enamels.

Pros: quick drying, no odor after drying, colour fastness that may be varied with international tints.

Cons: limited choice – perhaps not all enamels in this class can withstand high temperatures.

Acrylic enamels on solvents.

Pros: will not call for pre-treatment before painting heating gidpola.ru batteries, resistant to high temperatures and humidity, polished surface, long retains its original colour.

Disadvantages: Necessity to use dyes, inability to utilize universal colors to change the color shades.

Materials

To paint the battery, then you need to have, in addition to the chosen tooth:

  • Cleaner to the old paint coat,
  • glue,
  • primer using anti-corrosive properties plus a pair of brushes.

One brush can not do: for hard-to-reach areas desire a little, on a very long handle, to get the outer surfaces fit a wider, that may set the paint more evenly and conserve time.

カテゴリー: radiator パーマリンク